28 EN
Replace the battery. •
Aim the remote control directly at the sensor on the front of the unit. •
Poor radio reception
Increase the distance between the unit and your TV or VCR. •
Fully extend the FM antenna. •
Clock setting erased
Power has been interrupted or the power cable has been disconnected. •
Reset the clock. •
Sound input to the microphone cannot be heard clearly
Speak closer to the microphone when talking, or talk louder. •
Reduce or remove background noise. •
Reduce the volume of the unit to remove an echo. •
Audio quality is poor after connection with a Bluetooth device
The Bluetooth reception is poor. Move the device closer to the unit, or remove •
any obstacle between the device and the unit.
A device cannot connect with the unit
The device does not support Bluetooth communication, or any of the compatible •
profi les required for the unit.
You have not enabled the Bluetooth function of the device. Refer to the user •
manual of the device on how to enable the function.
The device is not correctly connected. • Connect the device correctly. (see ‘Connect
with a Bluetooth device’ on page 21 )
The unit is already connected with another Bluetooth device. Disconnect the •
connected device, then try again.
The connected mobile phone connects and disconnects constantly
The Bluetooth reception is poor. Move the mobile phone closer to the unit, or •
remove any obstacle between the mobile phone and the unit.
Some mobile phones may connect and disconnect constantly when you make or •
end calls. This does not indicate any malfunction of the unit.
For some mobile phones, the Bluetooth connection can be deactivated •
automatically to save power. This does not indicate any malfunction of the unit.
DC350_37.indd 28DC350_37.indd 28 1/7/2009 1:59:09 PM1/7/2009 1:59:09 PM
