RR.
T
he channel NAME feature
allows you to list the
ÒcallÓ letters of your favorite
stations beside their channel
numbers when they appear
on the screen. The TV has in
memory a list of the 50 most
popular channel names (for
example, ABC, NBC, FOX,
etc.). You also can enter a
custom name (up to five
characters).
NAME
Press the MENU but-
ton on the remote control to
show the onscreen menu.
Press the CURSOR
DOWN button repeatedly
until INSTALL in highlighted.
Press the CURSOR
DOWN button repeatedly until
the NAME control is highlighted.
After you have selected a
name for the channel, press
the MENU button to save the
name in the TVÕs memory.
Press the CURSOR
RIGHT button to shift the
menu to the left. LANGUAGE
will be highlighted.
TIME . . .
TIME . . .
TIME . . .
A
utoChron
TM
can automat-
ically set the TVÕs
onscreen clock. Because the
time is received from a
broadcast signal, you must be
sure that a cable TV or
antenna signal is present
before you attempt to use the
AutoChron
TM
feature.
AutoChron™
Press the MENU but-
ton on the remote to show the
onscreen menu.
Press the CURSOR
DOWN button repeatedly
until INSTALL is highlighted.
Press the CURSOR DOWN
button until the AutoChron control
is highlighted.
Press the CURSOR
RIGHT button to shift the
menu to the left. LANGUAGE
will be highlighted.
Press the CURSOR UP
or CURSOR DOWN button to
scroll through the list of avail-
able channels. Or press the
number buttons on your remote
control to select a specific chan-
nel (for example, press 0 and
then 2 to select channel 2).
With the channel you
want to edit selected, press the
CURSOR RIGHT button to
mark the channel as SKIPPED.
The channel youÕve marked
SKIPPED will not appear when
you are changing from channel
to channel while watching TV.
NOTE: When you want to
add a channel that has been
marked SKIPPED, press the
CURSOR UP or CURSOR
DOWN button to highlight
the channel; then press the
CURSOR RIGHT button to
remove the word SKIPPED.
Press the CURSOR
RIGHT button to highlight the
NAME options area.
Press the CURSOR
RIGHT button again; then
press the CURSOR UP or
CURSOR DOWN button to
scroll through a list of options for
the first character (A through Z, 0
through 9). Press the CURSOR
RIGHT button and repeat for
the second, third, fourth, and fifth
characters.
Press the CURSOR
RIGHT button to start the
AutoChron™ feature. Then just
follow the onscreen instructions
to set the clock.
NOTE: When setting the
clock manually, press the
number buttons on the remote
control to enter the time.
Don’t forget to set AM or PM
with the CURSOR UPor
CURSOR DOWN button.
Follow these
onscreen
instructions
to set
AutoChron™
automatically.
Follow these
onscreen
instructions
to set
AutoChron™
manually.
The channels available for you to edit are the ones that the AUTO PROGRAM feature found through a search of your
TV antenna or cable TV signals. Channels not found during the search are marked SKIPPED.
SMART HELP
Press the
STATUS/EXIT button to
clear the menu from the
screen.
The five characters that the channel NAME feature allows you to
input can be letters, a dash character, or the numbers 0 through 9.
SMART HELP
Press the CURSOR
RIGHT button to select AUTO.
Within a few seconds, a menu
for choosing your time zone will
appear.
Press the CURSOR UP
or CURSOR DOWN button
to highlight your correct time
zone.
With your correct time
zone highlighted, press the
CURSOR RIGHT button.
Within a few seconds, you will
be given the option to choose
whether you want to select
Daylight Savings Time.
Press the CURSOR UP
or CUSOR DOWN button to
navigate through the YES and
NO selection list; then with the
item you want to select high-
lighted, press the CURSOR
RIGHT button. Follow the
onscreen instructions (shown
below) to set the AutoChronª
time either automatically or
manually.
Up to 5 characters
