Press one of the pre-programmed
buttons on the remote control (Red, Green,
Yellow or Blue). The screen will display a
with the first programmed
SMILEY with the first programmed SMILEY
channel for that surf list.
SMILEY STILL appears SMILEY
on the screen, press the same
button on the remote control to tune to the
second channel programmed for that surf list.
SMILEY appears will tune SMILEY
all the programmed channels. Pressing the
button again will return you to
the first channel in the list.
SMILEY disappears from the SMILEY
pressed, the surf channels will be displayed
starting with the FIRST programmed channel
Repeat steps 1 - 3 for the other three
buttons (Surf list) if desired.
remote control while the SMILEY
with the channel number will allow you to
remove it from the surf list (see previous page
he QuadraSurf buttons on the remote control allow you to store up to 10 channels per button (40 in total). You
he QuadraSurf buttons on the remote control allow you to store up to 10 channels per button (40 in total). You
T
can program the AV input channels for each button making them a “source” button.
Tcan program the AV input channels for each button making them a “source” button.T
Assuming channels have been added to the four Quadra Surf lists (the four colored buttons, see previous page).
Yellow or Blue). The screen will display a
with the first programmed
with the first programmed
with the first programmed
with the first programmed
10
12
18
22
28
35
39
41
56
99
12
Remove Item? - Press
VOL
A/CH (ALTERNATING CHANNELS)
our remote control has an
Y
our remote control has an
Y
(Alternate Channel) button which allows you toggle between the current channel
you are watching and the previous channel.
Yyou are watching and the previous channel. Y
on the remote control to toggle
between the current and previous channel.
