6-1
6371-A2-GB20-10
August 2000
Diagnostics and Troubleshooting
6
Diagnostics and Troubleshooting Overview
There are several features available to assist in evaluating the Hotwire DSL
Router. The following sections are covered in this chapter:
H Device Restart
H Alarms Inquiry
H System Log
H Ping
H TraceRoute
Device Restart
The DSL router can be restarted locally or remotely. From the Command Line
Interface, type Restart and press Enter.
The DSL router reinitializes itself, performing a power-on self-test and resetting
the local System Log (SYSLOG).
Alarms Inquiry
show alarms
This command allows the operator to display the list of current alarm conditions, if any.
Minimum access level: Operator
The possible output lines are:
Alarm: Management Address Conflict
Alarm: Failed Selftest
Alarm: System Error
No alarm condition is set
Alarm condition reverts to Normal when the offending problem has been corrected.
