LABELING EXERCISES
33
Exercise 4
Create serialized wire markers with heat shrink tubing
• Step 1: Insert a heat shrink tubing label cassette such as H000X044F1C
• Step 2: When prompted, select New Blank File. Save previous label if
necessary.
• Step 3: Type WIRE
• Step 4: Press INSERT key
• Step 5: Press down arrow key once to highlight Serial
• Step 6: Press
• Step 7: Press right arrow key
• Step 8: Type 1 for Start value
• Step 9: Press
• Step 10: Press right arrow key
• Step 11: Type 3 for End value
• Step 12: Press
twice
• Step 13: Press PRINT
Results:
Hint: The Serial tool allows numeric or alphabetic
serializations.
You can choose any increment from 1 to 99,
print multiple copies of a series, and even
collate the copies of the series items.
Heat shrink tubing can be partially cut to create
a strand of individual markers. The Cut/Pause
function in the Setup Menu will pause a print
job between each consecutive label for cutting.
IRE1
WIRE1
IRE2
WIRE2
IRE3
WIRE3
WIRE1
IRE1
WIRE2
IRE2
WIRE3
IRE3
…Using Cut/Pause Function
Heat Shrink Serialization…
