59
Main Menu
Using the Printer
Menu Mode
The Menu mode includes a Main menu, Item menu, Selection 1 menu and Selection
2 menu which can be changed from the printer panel.
When Ready is displayed in the upper line of the LCD, pressing the MENU/EXIT
button will allow you to enter the Menu mode.
Once in the Menu mode:
BPress the F/CONTINUE button to:
Display the next menu.
Display the next item.
Increase the numerical value of the selection by 1 or display the next selection.
BPress the I/CANCEL button to:
Display the previous menu.
Display the previous item.
Decrease the numerical value of the selection by 1 or display the next selection.
BPress the ENTER button to:
Enter a sub - menu.
Activate a selection.
Print a Configuration/Color Calibration Page.
Before you attempt to change any settings, check the factory default settings in the
following table. For details on changing the settings, refer to Outline for Operation
(☞ P. 62).
Once you have changed the printer panel settings, they are automatically saved as
user default settings even if the power is turned off.
Item Menu
Test Page
Selection 2 MenuSelection 1 Menu
Configuration Page
Calibration Offset
CYAN
MAGENTA
YELLOW
BLACK
Calibration Test Print
Reset Calibration
0*
1
(-5 to 5)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
YES
NO
Energy Star
Auto Continue
Color Calibration
ON*
1
Data Timeout
System Setting
OFF
ON
OFF*
1
ON 30*
1
(30 to 240s)
OFF*
1
IP Address xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Network *
2
Subnet Mask
Default Gateway
*
1
Factory default setting
*
2
This menu appears when the optional network card is installed.
(continued)
