If you use an extension telephone
and wish to use it to receive a fax,
activate this feature, and enter the
code (p. 50).
FAX ACTIVATION
Features Summary
58
(The default setting is in bold type.)
Programming table (cont.)
Code Display & Feature Settings How the unit operates
#46
To receive a fax automatically
when you answer a call and hear
a fax calling tone (slow beep).
FRIENDLY RCV
ON
OFF
#44
To alert you with beeps when a
received document is stored into
memory due to a problem.
RECEIVE ALERT
ON
OFF
Advanced features (cont.)!
#41
ON /
CODE= 9
OFF
1.
Follow steps 1–3 above.
2. Rotate to select “ON”.
3. Press .
4. Enter your code from 2 to 4 digits,
using 0–9 and .
5. Press .
6. Press .
●
Do not enter “0000”.
●
This code is also used to receive
a voice message and a fax in the
same call (p. 47).
If you hear slow beeps, clear the
printing problem or supply paper to
print the stored document. The
beeps will stop.
“ON”: You do not have to press
for fax reception.
How to set menu options
1. Press .
2. Rotate until the following is displayed.
Display:
Press and rotate until the desired
feature is displayed.
3. Press .
4. Rotate until the desired setting is displayed.
5. Press .
6. Press .
