E-56 Pacemark 4410 Setup Guide
Forms Tear-Off Feature
Caution! Never engage Forms Tear-Off when printing on
labels.
Forms Tear-Off automatically moves continuous forms up to the tear
position after the interval you select, then moves it back down again for
printing when the printer receives more data.
This feature is normally turned off. To activate it:
1. Press MENU to enter the menu mode.
2. Press GROUP until the paper path you are using appears on the
second line of the display.
3. Press ITEM until Form Tear-Off appears on the display.
4. Press OPTION until the time interval setting you wish to select
appears.
5. Press STORE to save that setting.
6. Press MENU to exit the menu mode.
Some programs pause occasionally while sending data. If the
pause is too long, the paper will advance to the tear-off
position until more data is received. This extra paper
movement can cause uneven print registration in graphics. If
you have this problem, use the menu to turn off the Forms
Tear-Off feature.
