10
Installing Your Printer
Before connecting the printer to your PC and mains outlet, you
must first install the toner cartridge and insert paper in the paper
tray.
Note: Your printer is shipped with the image drum cartridge
already installed.
1. Remove any adhesive tape from the outer covers.
2. Press the OPEN button to release the top cover, and raise
the cover to the fully upright position.
3. Carefully lift out the image drum cartridge. Avoid
touching the green drum surface with your fingers.
4. Pull out the protect sheet of paper from the image drum
cartridge.
Note: The first time you open the top over will be to install
your first toner cartridge. At this time the power will be
off and the printer cold.
When you open the top cover after this, for example to
change the toner cartridge, the fuser area will be hot.
This area is clearly marked. Do not touch it.
LETTER
LEGALA4 OTHER
ENV
READY
ATTENTION
MAN FEED
DATA
16n_gbR.pm6 16/09/96, 17:3010
