Executive Series 2426 Printer Family User’s Guide
Print Job Accounting Utility • 703
Print Logs
Setting Up/Changing the Log Acquisition Interval
The log acquisition interval is normally set up when you register a
printer (see “Registering Printers” on page 667).
To change the log acquisition interval for a particular registered
printer or group:
1. From the main Job Accounting window, click Printer to open the
printer tree, then click the printer for which you wish to change the
acquisition interval.
2. Click Printer → Properties.
3. On the Options tab, make any desired changes under Acquire
Logs, then click OK.
Manually Setting Up Items Reported in the Log
To set up the items to be displayed in, or exported from, a log:
1. From the main Job Accounting window, click the printer/group for
which you wish to set up the log display.
2. Click Log → Display/Export Item Settings.
3. Click one of the following selections to set the items to be
displayed and the sequence in which they will be displayed:
NOTE
The Server computer must be running continuously, or at
least be running at the scheduled time(s) each day, for the
software to acquire the print job information.
