11
SEAT BELT WARNING LIGHT AND CHIME
The light and chime remind you to fasten your seat belts.
The light illuminates whenever the ignition switch is placed
in the ON or START position and remains illuminated until
the driver’s seat belt is fastened. At the same time, the
chime sounds for approximately 6 seconds unless the
driver’s seat belt is securely fastened.
The seat belt warning light may also illuminate if the
front-passenger’s seat belt is not fastened when the
front- passenger’s seat is occupied (if so equipped).
For 7 seconds after the ignition switch is in the ON
position, the system does not activate the warning
light for the front passenger.
CHILD SAFETY REAR DOOR LOCK (Crew Cab model only)
Child safety locks help prevent the rear doors from being opened accidentally,
especially when small children are in the vehicle. The child safety lock levers
are located on the edge of the rear doors. When the lever is in the LOCK
position, the door can only be opened from the outside.
MOONROOF CONTROLS (if so equipped)
The ignition switch must be in the ON position to operate the
moonroof controls.
TILTING THE MOONROOF
To tilt the moonroof up, first close the moonroof by
pushing the switch toward UP/CLOSE
01
. Release
the switch, then push the UP/CLOSE
01
switch again
to tilt the moonroof up.
To tilt the moonroof down, push the switch toward
DOWN/OPEN
02
.
SLIDING THE MOONROOF
To fully open the moonroof, push the switch toward DOWN/OPEN
02
. To open the
moonroof part way, push the switch in any direction while the moonroof is sliding to stop
it in the desired position.
To fully close the moonroof, push the switch toward UP/CLOSE
01
. To close the
moonroof part way, push the switch in any direction while the moonroof is sliding to stop
it in the desired position.
02
01
