•
DC Voltmeter*
•
DC Ammeter*
•
Hourmeter*
•
Relays. 4 relays, wired for Preheat, Crank, Fuel, and Common Alarm
•
Keyswitch
•
Phase select switch, standard for 3-phase units, optional for single-
phase units.
•
Emergency stop switch
•
NEMA-4X enclosure
•
Quick disconnect connectors
•
Hinged front panel
•
Magnetic pickup sensor
•
CT’s (current transformers)
•
User connections
•
If the Quick Disconnect option is selected, two quick disconnect con-
nectors are provided on the rear of the enclosure, mating connectors
with 12 ft. (3.658 m) tagged leads are available.
•
If the Quick Disconnect option is not selected, grommeted holes are
provided for user’s cable entry. Connections via spade lugs will be
made to standard terminal blocks inside the MGC2000 enclosure.
Booted type grommets for a tight seal are available.
* The MGC2000 enclosure has provisions for two extra instruments only,
these two instruments can be selected in any combination.
MGC2000 System Options
MGC-02029B page 3 of 4
13-31/32 in.
5/16 x 1/2 in. (8 x 13 mm)
10-5/8 in.
18-63/64 in.
18-1/2 in.
NEMA 4X Type Enclosure Dimensions
WARNING: Do not bundle AC and DC wiring together. It is required
to use separate conduit runs and keep apart by at least 2 inches.
