Problem Possible cause Remedy
The Clean out
airways
indicator light
comes on.
This indicator light comes on
to warn you that the dryer is
not working efficiently.
Possible cause: the fluff filter
is clogged with fluff or with
detergent residues.
–
Cleaning the fluff filter is
usually all that is required.
However, if the Clean out
airways indicator light does
not go out after you have
cleaned the filter, then also
check all the possible
causes described under
"The drying process goes
on too long or even
switches off".
To switch off the indicator
light:
– With the dryer switched on,
open and close the door.
The vent ducting may be very
long, which does not
constitute a fault.
– See "Installation - venting"
regarding calculating
length and diameter.
– If very long ducting is used,
then programme times will
be longer and energy
consumption higher.
The Clean out airways
indicator light can be
deactivated (see
"Programmable functions").
The programme
stops.
The Clean out
airways
indicator light
comes on.
The buzzer
sounds.
See above for possible
causes and their remedies.
To switch off the indicator
light:
–
With the dryer switched on,
open and close the door.
–
Then start the programme
again.
–
If the Clean out airways
indicator light comes on
again, contact the Miele
Service Dept.
Problem solving guide
25
