Temperature display brightness
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
The level of brightness can be
adjusted:
^ Press and hold the Super freeze
button for approx. 5 seconds.
The Super freeze indicator light flashes
and a
; flashes in the temperature
display.
^
Press one of the temperature selector
buttons repeatedly until
^ appears in
the display.
^
Then press the Super freeze button
again.
^ lights up in the display.
^
You can now adjust the level of
brightness by pressing the
temperature selector buttons. You
can choose from settings 1 to 5:
1: dimmest setting,
5: brightest setting.
^
Press the Super freeze button to save
the setting.
^
Press the master switch on the right
hand side of the control panel to
come out of the setting mode.
Otherwise the electronics will revert
to normal operation after a couple of
minutes.
The correct temperature
21
