^
Screw bracket d using hex screw e
to the pre-drilled holes in the
appliance door.
^
Push the appliance two-thirds of the
way into its niche.
When doing this, make sure that the
mains cable does not get trapped.
Tip to help you push it into position:
Secure a length of string to the plug to
"increase" the length of the connection
cable.
Then pull the cable by the end of the
string through the housing unit. It will
then be easier to connect once the
appliance is in the unit.
With 16 mm thick unit walls:
^
Clip spacers b and c on to the
right-hand side of the hinges.
^
Open both appliance doors.
Building in the appliance
58
