^
Attach a new valve insert, t, to the
blunt end of the special tool.
^
Insert this into the opening of the
connector.
Make sure that the sealing ring on the
valve insert is at the front.
^ Press the valve insert firmly into
position using the blunt end of the
tool.
O-Ring
Over time the water container may
become difficult to insert and remove
from the appliance.
If this happens the black O-Ring, u,
should be lubricated with a very small
amount of the silicone grease supplied.
Leave the O-Ring on the connector
while doing do.
Take care when using silicone
grease.
– Remove any silicone grease
from your skin by washing with
soap and water.
– If silicone gets into the eyes
flush with plenty of clean water.
– If silicone is swallowed seek
medical attention.
When lubricating the O-Ring only use
the silicone grease supplied. Never use
margarine, oil, or any other grease or
fat on the O-Ring because they will
cause deterioration.
Cleaning and care
47
