Before installing the appliance
^
Before installation, remove the
accessories bag with the installation
components and other accessories
from the appliance, and remove the
sealing strip from the appliance door.
^
Do not remove any of the following
from the back of the appliance:
– The spacers (depending on model).
These ensure that the required
distance is maintained between the
back of the appliance and the wall.
– The pouches (depending on model)
located inside the metal grille (heat
exchanger)
These are important for the correct
functioning of the appliance. Their
contents are non-toxic and are not
dangerous.
^
Remove the cable clip from the back
of the appliance.
^
Check that all parts at the back of the
appliance can vibrate freely.
Carefully bend apart any parts that
are touching.
^
Open the appliance door and remove
the red transport clips a (depending
on model).
Installation information
77
