![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/2/10/210eb588-8bf9-4b3b-8fe9-16ee54490e65/210eb588-8bf9-4b3b-8fe9-16ee54490e65-bg35.png)
Before using the appliance for the first
time the water inlet pipe should be
purged of air by a qualified and
competent person.
–
To do so the stainless steel hose
should be filled as far as possible
with water before being connected to
the appliance.
–
Mop up any spillages with a cloth.
^
Lay the stainless steel hose in the
building-in niche as shown, and
secure to the floor with adhesive
tape.
This ensures that the hose cannot
slip or get caught when the
appliance is pushed back into the
niche.
^
The appliance can now be installed
in the niche (see "Installation").
Appliances with an opening for feeding
the hose through:
^
Position the appliance in front of the
building-in niche and feed the
stainless steel hose through the
opening at the back of the appliance.
At this stage the building-in niche
should be ready for the appliance to be
pushed into the niche (see
"Installation").
^ Proceed with building in the
appliance.
Mains water connection
53