Press this key on the remote
control
The screen displays Explanation
If the TV station table is now dis-
played instead of the combined
station table, see the instructions
in Step 2.
14
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
5. SAT Sound Settings
Muting and sound mode
All parameters for the sound adjustment for a satellite station can be programmed in the submenu „Adj. SAT sound“.
These adjustments need to be made only if new stations, whose settings are not stored in the SAT program assignments, are to be received.
1. Call the station table and
select „Further settings“
3. Call the submenu „Adj. SAT
sound“ and set the sound
mode
Auto.
Auto.
Auto.
Auto.
Volume adjustm.
Adj. SAT sound
Auto.
Auto.
Auto.
Auto.
Volume adjustm.
Adj. SAT sound
Many SAT TV stations also transmit radio programs on
sound subcarriers, e.g. RTL Radio on RTL 4 (see also
section 10,“SAT radio operation“). In the case of enco-
ded SAT stations, the TV set switches the sound off
because no TV station can be detected.
The muting function must be set to Off for the recepti-
on of such encoded SAT stations.
The muting function permits you to receive radio pro-
grams from encoded stations.
If the sound from encoded SAT stations is switched
off, reception of the sound is possible only by setting
the muting function to Off.
All parameters required for a SAT station can be adju-
sted in the submenu Adj. SAT sound.
These settings must be made individually for each
program position.
In this menu, you can select the sound mode: MONO,
STEREO or DUAL (for dual-channel programs).
red
