138 NET.CFG Parameters
MX3 Reference Guide E-EQ-MX3RG-J-ARC
interrupt
Sets the interrupt (IRQ) line to be used.
Default: 5
powermgmt
Configures whether the Symbol FHSS radio card will perform power management.
Valid: Y=Yes or N=No
Default: N
Note: This parameter is valid for Symbol FHSS radios only.
performance_index
Configures whether the Symbol 4121 series radio will perform power management.
Valid: 0=CAM Constant Awake Mode
1=Power Management On
Default: 1
Note: This parameter is valid for Symbol 4121 series radios only.
Auth_type
This parameter is used to enable and manage the 802.11 WEP encryption. The radio card will
only associate with APs that support the same Auth_type.
Valid: “Open_System” or “Shared_Key”
Default: “Open_System”
Note: This parameter is valid for Symbol 4121 series radios only.
Encrypt-Key#
Updates the first, second, third or fourth encryption key, according to the value of #.
For Symbol 4121 series radio cards, use 5 pairs of hex digits for 40 bit encryption. Use 13 pairs
of hex digits for 128 bit encryption.
encrypt_enable
Enables encryption on Symbol 4121 series radios.
Valid: yes or no
Default: yes
Note: This parameter is valid for Symbol 4121 series radios only.
Note: This parameter was removed from the Symbol NET.CFG file by LXE effective 11/ 2003.
