A SERVICE OF

logo

Open as PDF
next previous
3
1. AR Mast Mount Installation
The LWX-1 AR is shipped in the retail box factory-congured for a mast mount.
To use AR Mast Mount Installation:
Loosen the four AR Bolts & Nuts (a couple of counter-clockwise 1.
turns on each).
The AR Mast Boot will loosen, allowing the AR Mast Mount to turn.2.
Insert the AR Interconnect Cable into the Antenna Mount and route 3.
it carefully to the Interface Module (IM). Planning the cable route in
advance will avoid multiple cable pulls that could increase the likeli-
hood of damaging the connector.
NOTE: When installing, make sure the RJ45 will t properly
through any ratchet mounts or other boat hardware.