A SERVICE OF

logo

Monitoring and Configuring the Printer
208
Use the “primary” command to configure a primary WINS server IP ad-
dress.
Use the “secondary” command to configure a secondary WINS server IP
address.
Do not use “255.255.255.255” as the IP address.
NBT (NetBIOS over TCP/IP) Scope ID Selection
You can specify the NBT scope ID.
msh> wins “interface_name” scope “scope ID”
The scope ID can be entered using up to 31 alphanumeric characters.
Be sure to specify the interface.
ip1394 can be specified only when the IEEE 1394 interface is installed.
wlan can be specified only when the IEEE 802.11b interface is installed.
Interface name Interface configured
ether Ethernet interface
ip1394 IEEE 1394 interface
wlan IEEE 802.11b interface