48
Appendix
Troubleshooting
Power does not turn on
• Is the AC adaptor connected correctly?
• Does the rechargeable battery have sufficient remaining capacity?
• Did you hold down the power button?
Nothing appears in the display
• Is the contrast adjusted correctly? (→p.38)
Display is dark
• Is the backlight set to "OFF"? (→p.26)
No sound
• Is the MR-1 and the connected equipment powered-on? (→p.12)
• Are the amp or headphone connections incorrect?
Can't hear the playback
• Is the volume set to "0"?
Can't hear the audio input
• Are the recording settings correct?
• Is the recording level raised?
• Make sure that audio is being input.
In the level meter screen, verify that the level meters are moving.
Can't record
• Is the recording level too low?
• Is there sufficient hard disk space remaining?
→ Set the counter display to "Free" and check the remaining time available for recording.
(→p.24)
The recording is interrupted
• Could the MR-1 have been bumped while recording?
• Could the MR-1 have been in a location subject to continuous vibration (such as near a
motor or a bass amp) while recording?
MR1_Text4_E.p65 06.11.22, 0:02 PM48
