2. Objectives of this document
To supply information to configure a remote control system via a home LAN or internet
using the TS-990S, ARCP-990, ARHP-990 and VoIP Program.
Programs and Functions
Operates transceiver remotely
ARHP-990
Receives the display data from
the transceiver, and sends it
over the network to the ARCP.
Also receives control data sent
from the ARCP, and sends it to
VoIP Program
Transmits and receives audio
between the host station and
Host Station
Requirements
Programs used
ARHP-990
ARHP-990
Transmits and
receives audio
(The VoIP feature that is built
into the ARCP-990 and
ARHP-990 cannot be used.)
Use the VoIP feature that is
built into the ARCP-990 and
ARHP-990. Or use a VoIP
Network
Connection via the internet
(To use the internet, a contract
with a provider is necessary.)
Connection using a home LAN
Application based
on the Radio Act
Application using the internet
Application using a home LAN
