16
SEND THE GPS DATA
If a GPS unit has been installed and is set up by your
dealer, your transceiver may automatically transmit
your GPS data.
MANUALLY SENDING THE GPS DATA
1 While in Selcall Mode, press the key programmed
as Selcall to view the Selcall list.
2 Press the CH and keys to select the ID of the
station you want to call.
3 Press the D> key to view the Status list.
4 Press the CH and keys to select “GPS
DATA”.
5 Press the ■ key or the PTT switch to send the
GPS data.
• While making the call, the icon flashes and
“SEND DATA” appears on the display.
• “COMPLETE” appears on the display when the call
has been successfully transmitted.
GPS POLLING
If your transceiver receives a GPS Polling request, it
will automatically transmit your GPS data to the
requesting station.
• “SEND DATA” appears on the display until the data has
been transmitted.
SHORT TEXT MESSAGES
To send and receive short text messages, you must
connect the transceiver to a PC. Ask your dealer for
details.
• Short text messages can contain a maximum of 48
characters.
