A SERVICE OF

logo

Open as PDF
next previous
7070 71
Return to the Top page
Setting Up
Return to the Top page
Setting Up
User interface
Youcansetupuserinterfaceparameters.
1
Touch [User Interface] in the list.
User Interface screen appears.
2
Set each item as follows.
Beep*
1
Turnsthekeytouchtoneonoroff.
Defaultis“ON”.
Remote Sensor*
2
Selectsaremotecontrolsignal.Defaultis“ON”.
Language
Selectthelanguageusedforthecontrol
screenandsettingitems.SeeLanguage setup
(P.71).
Text Scroll
Allowsscrollingoftextdisplayonthesource
controlscreen.Selectfrom“Auto”/”Once”/”OFF”.
Auto (Default):Scrollsthetextautomatically.
Once:
Allowsyoutoscrollthetextonlyonce
automaticallywhenupdated.
OFF:Doesnotscrollthetextautomatically.
*1Whenthe
Travel Prayer for Safe Drive
Setting (P.72)
issetto“ON”,thisfunction
issetto“OFF”automatically.
*2Whenturnedoff“RemoteSensor”,the
remotecontrolofTVreceptionisrejected.
Drawer Close
Setswhethertoclosethecommonmenu
(P.18)automatically.Defaultis“Auto”.
Animation
Setswhethertodisplayanimation.Defaultis“ON”.
Secondary
Setswhethertodisplaythenavigation
informationintheaudioscreenorviceversa.
Defaultis“ON”.
Vehicle Information
Displaysthevehicleinformation.
Thisfunctionrequiresacommercialadaptor.
ConsultyourKenwooddealerfordetails.
Steering Remote Controller
Setsthedesiredfunctioninthesteeringremote
controller.SeeLearning function of steering
remote (P.71).
Travel Prayer for Safe Drive
(DNX7310BTM/ DNX5310BTM only）
Whenthisfunctionisset,theprayerfordriving
safetyisdisplayedwhentheunitisturnedon,
thenQuranisplayed.
SeeTravel Prayer for
Safe Drive Setting (P.72).
Language setup
1
Touch [SET] of [Language] in the User
Interface screen.
Language Setting screen appears.
2
Set each item as follows.
Select Mode
Selectsthemodetoselectalanguage.
Easy (Default):Selectsalanguageeasily.
Advanced:Allowsyoutoselectlanguagesfor
respectiveitems.*
Language Select
Selectsalanguage.
*Ifyouselect[Advanced]forSelectMode,
thefollowingscreenappears.
GUI Language Select:
Selectsthedisplaylanguageusedforthe
controlscreenandsoforth.
Navigation Language Select:
Selectsthelanguageusedfornavigation.
Text Language Select:
Selectsthelanguageusedfortagtext(song
information).
3
Touch [Enter].
NOTE
•Tocancelthelanguagesetup,touch[Cancel].
Learning function of steering remote
Thisfunctionisavailableonlywhenyour
vehicleisequippedwiththeelectrical
steeringremotecontroller.
Ifyoursteeringremotecontrollerisnot
compliant,learningmaynotbecompleted
anderrormessagemayappear.
1
Touch [SET] of [Steering Remote
Controller].
Steering Remote Controller Setting
screen appears.
2
Press the steering remote controller
button you want to set the function.
NOTE
•Youcanhavetheunitlearnedallbuttonsata
time.Inthatcase,presstheallbuttonsoneata
timeandafterpressingallofthem,touch[Done]
inSteeringRemoteControllerSettingscreen.
However,newfunctionscannotbelearnedafter
thisoperation.
3
Touch the function you want to set.
4
Repeat steps 2 and 3 as necessary.
5
Touch [Done].
NOTE
•Whenchangingthefunctionalreadylearned,
touchthebuttonyouwanttochangeinstep2
andthentouchtoselectthechangedfunction
fromthefunctionlist.
•Confirmthecontentsofthesettablefunctionon
thefunctionlist.Youcannoteditthefunctionlist.
•Toinitializethecontents,touch[Initialize]of
[SteeringRemoteController]inUserInterface
screen.Afteryoutouch[Initialize],aconfirmation
messageappears.Followthemessageand
completetheoperation.