English 37DDX SERIES DDX616/DDX6046BT/DDX516
SIRIUS/XM Control (North American sales area only)
Source Control Screen
Switches to control screen to use various
functions.
Display the Source 1 Control Screen
See <How to Display the Source Control
Screen> (page 14).
Operation on the Source Control Screen2
1
[BAND] Switches the band.
[4], [¢] Tunes in a channel.
Use the [SEEK] to change the channel seek
mode.
[List] Display the Category List screen. (page
38).
1 Information display
Displays information concerning music
being played.
SIRIUSSIRIUS
Changes the display from Channel
Name, Song Title Name, Artist Name,
Composer Name, to Category Name.
XMXM
Changes the display from Channel
Name, Artist Name, Song Title Name, to
Category Name.
Displays the ID number when Channel 0 is
selected.
SIRIUSSIRIUS
Displays the SIRIUS ID.
XMXM
Displays the RADIO ID.
"SR"/ "XM" Band display
"Preset" Preset number
"ch" Channel display
[
] When appears, the text display is
scrolled by touching it.
Various control screens appear in the Satellite radio source mode. (only with the optional accessory
Satellite radio connected. To connect the SIRIUS tuner, a conversion cable CA-SR20V (optional accessory) is
necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.)
• This document uses the SIRIUS display as an example.
Multi Function
[1/2] Switches the multi function display.
[
] Closes the multi function bar.
[
] Opens the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons appear,
you can recall the channel on memory. For
memory of channel stations, see <Channel
Memory> (page 38).
[SEEK] Switches the Seek mode.
The mode is switched in the following order
each time you touch the button.
Display Setting
"SEEK1" Tunes channels one after the other.
"SEEK2" Selects channels in memory one after the other.
[DIR] You can tune in by entering the desired
channel number. See <Direct Channel Search>
(page 39).
[CATE] You can tune in by specifying the
desired category. See <Channel Search> (page
38).
[SCN] Starts or stops Channel Scan (that tunes
channels one after the other).
[INFO] Displays the program information
screen.
