A SERVICE OF

logo

ELECTRICAL SYSTEM 16-55
Lighting System
Fit the projection [A] of the bulb in the hollow [B] of the
headlight.
Install the hook [C].
Fit the dust cover [A] with the arrow mark upward onto the
bulb [B] firmly as shown.
Good [C]
Bad [D]
Arrow Mark [E]
After installation, adjust the headlight aim (see t his chap-
ter).
Headlight Removal/Installation
Remove:
Fairing (see Frame chapter)
Disconnect the headlight connectors [A].
For the european model disconnect the city light connec-
tor.
Remove:
Bolts [A]
Headlight Assy [B]
Headlight installation is revers of removal.
Torque - Headlight Mounting Bolts : 5.9 N·m (0.60 kgf·m, 52
in·lb)