Receiver operation
12
The switching voltage on pin 8 of the TV Scart socket is turned off, and it is turned
on again by pressing once more.
In Sat mode, “
Sat mode
“ is displayed on the screen, the programme slot indicator
in the LED display begins with “
P
...“.
In TV mode, “
TV mode
“ is displayed on the screen, the programme slot indicator in
the LED display begins with “
T
...“.
Setting date and time
•
Press the
key to call up the menu for date and time setting, and turning the
continuous time display on/off.
The following screen display appears:
In this menu you can set the date and time and also turn on a continuous time dis-
play on the screen.
The bottom menu line shows keys you can use to make the settings.
Making the settings
•
Select the menu line using the
keys.
The chosen menu entry flashes.
•
Change the setting for continuous time display (ON/OFF) using the
keys.
•
For the direct entry of numerals use the
... keys.
Always enter the date as 6 positions and the time as 4 positions,
or
•
Change the values step-by-step using the
keys.
Saving settings and starting the clock
After entering the time press the
key in order to start the clock.
Return to receive mode
•
Press the
key to return to receive mode.
or
•
Press the
key to continue with the timer programming.
