SETUP
JBL Synthesis
3-56
When the REMOTE ONLY parameter is set to OFF and program operation parameters are set to
ON, the trigger output connector labeled 1 is associated with the corresponding Main Zone
input, Main Zone listening modes, or Zone 2 inputs. (The connector cannot be associated with
individual Zone 2 inputs; rather, it can be associated with the Zone 2 inputs as a group.) When
configured for program operation, the connector is activated when the corresponding inputs
and listening modes are selected and deactivated when the corresponding inputs and listening
modes are deselected.
Note:
When the CUSTOM menu RESET MODE option is selected to restore the factory-
default version of the selected listening mode, the corresponding TRIGGER SETUP
menu listening mode parameter is automatically set to OFF.
Program Operation Parameters ON, OFF
Configure the trigger output connector labeled 1 for
program operation. All TRIGGER SETUP menu
parameters – except the REMOTE ONLY parameter –
are considered program operation parameters. The
connector can be associated with multiple inputs and
listening modes at the same time.
(PROGRAM OPERATION PARAMETER)
