Invacare 1073955 Manual

A SERVICE OF

next previous

SECTION 6—ARMS

Orbit

™

42 Part No. 1073955

Installing/Removing the T-arms

NOTE:Forthisprocedure,refertoFIGURE 6.2.

Installing T-Arms

1. PositiontheT‐armovertheT‐armsocketonthewheelchairframe.

NOTE:Makesurethelockingleveristowardsthefrontofthewheelchair.

2. SlidetheT‐armintotheT‐armsocketuntilthelockingleverisintheslotintheT‐arm

socketandanaudibleʺclickʺisheard.

3. PullupontheT‐armtomakesuretheT‐armislockedinplace.

NOTE:IftheT‐armdoesnotslideintheT‐armsocketasdesired,adjusttheT‐armsocket.Referto

AdjustingtheT‐Armsonpage 43.

4. AdjusttheT‐armfordesiredheight,widthanddepth,ifnecessary.RefertoAdjusting

theT‐Armsonpage 43.

5. RepeatSTEPS1‐4fortheoppositesideofthewheelchair.

Removing T-Arms

1. PressinonthelockingleverandlifttheT‐armstraightupandoutoftheT‐armsocket.

NOTE:IftheT‐armdoesnotslideupanddownintheT‐armsocketasdesired,adjusttheT‐arm

socket.RefertoAdjustingtheT‐Armsonpage 43.

2. RepeatSTEP1fortheoppositesideofthewheelchair.

FIGURE 6.2 Installing/Removing the T-arms

T-Arm

Socket

Slot

Locking Lever

(Towards the front of

the wheelchair.)

T-Arm

Wheelchair

Frame