88 Intermec EasyCoder PF4i Compact Industrial—User’s Guide (Fingerprint)
Chapter 9—Options
Label Taken Sensor
The Label Taken Sensor (LTS) is a photoelectric sensor that enables the
printer’s fi rmware to detect if the latest printed label, ticket, tag, etc. has
been removed before printing another copy. The LTS can be enabled or
disabled using the instructions LTS& ON and LTS& OFF respectively
in Intermec Fingerprint and the Intermec Direct Protocol.
The LTS cannot be used in connection with a paper cutter.
Real Time Clock
The Real Time Clock circuit (RTC) relieves the operator or the host
from having to set the clock/calendar using the Intermec Fingerprint
instructions DATE$ and TIME$ after each power up. The RTC has its
own backup battery backup that will last 10 years or more.
CompactFlash Protection Plate
The protection plate encloses an inserted CompactFlash card and makes
it more diffi cult to steal. See Chapter 3 for illustration.
Special Printheads
As standard, the printer is fi tted with an 8 dots/mm (203.2 dots/inch)
thermal printhead. There are also a number of optional printheads for
special applications:
8 dots/mm (203.2 dots per inch)
Media Thickness Standard/Option
Max 175 µm (7 mils) Standard
170-220 µm (6.6-8.7 mils) Option
11.81 dots/mm (300 dots per inch)
Media Thickness Standard/Option
Max 175 µm (7 mils) Option
170-220 µm (6.6-8.7 mils) Option
The printhead can easily be replaced or exchanged by the operator as
described in Chapter 11.
