48
9 CONNECTIONS AND MAINTENANCE
New2001
■ Mounting the transceiver
DD
Using the supplied mounting bracket
The universal mounting bracket supplied with your transceiver
allows overhead or onboard mounting.
• Mount the transceiver securely with the 4 supplied screws
(M5 × 20) to a surface which is more than 10 mm thick and
can support more than 5 kg.
• Mount the transceiver so that the face of the transceiver is at
90° to your line of sight when operating it.
CAUTION: KEEP the transceiver and microphone at least
1 meter away from your vessel’s magnetic navigation com-
pass.
NOTE:
• Check the installation angle; the function display may not
be easy-to-read at some angles.
• When mounting the transceiver on the place that is prone
to strong vibration, use the supplied sponges between the
transceiver and mounting bracket for reducing the effect
of the vibration.
• OVERHEAD MOUNTING
• MOUNTING ON THE BOARD
Sponges reduce the
vibration effects.
See NOTE at left.
*
These screws are shown
a mounting example only.
Not supplied with acces-
sories.
Sponge*
Sponge*
!IC-M603.qxd 06.7.28 1:46 PM Page 48 (1,1)
