Husqvarna YTH2448T Manual

A SERVICE OF

next previous

19

• Turn steering wheel to position wheels straight for-

ward.

• ATTACH FRONT LINK (E) - Work from left side of trac-

tor. Insert rod end of link assembly through front hole

in tractor front suspension bracket (F) and secure with

retainer spring (G) through hole in link located behind

the bracket.

• Insert other end of link (E) into hole in front mower bracket

(H) and secure with washer and retainer spring (J).

A

B

C

D

• ATTACH REAR LIFT LINKS (C) - Lift rear corner of

mower and position slot in link assembly over pin on

rear mower bracket (D) and secure with washer and

retainer spring.

• Repeat on opposite side of tractor.

FIG. 20

FIG. 21

E

F

H

G

J

FIG. 22

SERVICE AND ADJUSTMENTS

M

FIG. 23

• Disengage belt tension rod (K) from locking bracket

(L).

• Install belt onto engine clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower

pulley grooves.