41569-01 5/24/2002 7 © 2002 HUNTER FAN CO.
you may use this kit to correct the balance per
the instructions supplied with the kit.
Step 8: Operation of Your
Hunter Fan
1. The operation of your fan is controlled with a
pull-chain switch, which has four (4) positions:
Off — High — Medium — Low. Pull the chain
gently to obtain the speed you desire.
2. The Break-A-Way Connector is designed to
separate from the chain at a predetermined
force. If this separation occurs, simply reinsert
the connector. It can be used again and again.
See Figure 19.
3. Reversing your fan is controlled by a small
switch located on the switch housing. See Fig-
ure 20.
NOTE: Ceiling fans are usually adjusted once in
the fall and again in the spring to blow upward in
the winter and downward in the summer. You may
run them in either direction at anytime, however,
as you prefer. Experiment as you like to obtain
maximum comfort from your fan.
Figure 19
Figure 20
Reversing Switch
Care and Maintenance
Once properly installed, your fan needs little
attention, beyond checking the oil level. Oil is
checked with a pip cleaner used as a dipstick. See
Step 6. Take care when cleaning your fan. Never
use an abrasive cleanser or brass polish. Use a
damp cloth or sponge. Do not drip water or soap
into the motor. Blades should be wiped clean
periodically to prevent dust buildup. Be careful
not to bend the blade irons. If blades are cracked
or blade irons bent, do not attempt to repair them.
Order replacement parts from your Hunter dealer.
The Inside Story
Oil is constantly pumped up the spiral groove to
lubricate the rotor and the shaft. The oil is returned
to the reservoir where the bearings are submerged
in a bath of oil. This unique lubrication system is built
into all Original Hunter Ceiling Fans. That’s one reason
Hunters last so long. And why we can offer a Limited
Lifetime Warranty.
We appreciate the opportunity to supply you with
the best ceiling fan available anywhere in the
world.
Record the following information for your records
and warranty assistance. Please refer to the carton
and the Hunter nameplate (located on the top
outside fan motor housing) for the proper
information.
Model Name ______________________________
Catalog No. _______________________________
Serial No. _________________________________
Date Purchased ____________________________
Where Purchased __________________________
____________________________________________________
Attach Your Receipt
or a Copy of
Your Receipt Here
