Human Touch 2 Manual

next previous

1. Place the massage mechanism into position, then replace the eight screws to secure it.

2. Connect the four massage mechanism connectors to the corresponding connectors on the chair.

3. Using new zip-ties, secure the massage mechanism cable harnesses to the chair in the same location as they were secured previously.

4. Close the backrest zipper.

5. Plug in the chair, power it on, then verify that it is working properly.

6. Using a Phillips-head screwdriver, remove all eight screws that secure the massage mechanism to the chair (Fig.4).

7. Remove the massage mechanism from the chair (Fig.5).

INSTALLING THE NEW MASSAGE MECHANISM

Please send any questions or comments regarding these instructions to: documentation@humantouch.com

, LLC.

(Fig.4)

Massage mechanism