ENWW 4-31
Performing automatic booklet printing
You can print booklets automatically when the auto-duplex unit is installed on the printer (see
“Installing the auto-duplex unit”).
For Windows
1 Load the appropriate paper (see “Loading media in the input tray”).
2 Open the printer driver (see “Printing a document”).
3 Click the Finishing tab.
4 Select the Print on Both Sides check box, and ensure that Use Auto-Duplex Unit is
selected.
5 Select Preserve Layout.
6 Select a binding option in the Booklet Layout is drop-down list.
7 Do one of the following:
• To leave every other page of the booklet blank, select Print on One Side.
• To print on all pages in the booklet, clear the Print on One Side check box (if it is
selected).
8 Change any other desired print settings and click OK.
9 Print your document.
For Macintosh
1 Load the appropriate paper (see “Loading media in the input tray”).
2 Click File, and then click Print.
3 Mac OS 9.1.x and 9.2.x:
i Open the Layout panel.
ii Select the booklet option from the Multiple Pages Per Sheet drop-down list.
iii Select Print Both Sides, and then select Automatic.
Mac OS X (10.1 and later):
i Open the Two Sided Printing panel.
ii Select Print Both Sides.
4 Select the desired binding orientation by clicking the appropriate icon.
5 Change any other desired print settings and click OK or Print.
The auto-duplex unit is a standard part in the hp deskjet 9670. It may be purchased separately
in some countries/regions (see “HP supplies and accessories”).
