1.Enter the system settings menu
2. Press the button to
select ”Back time”
3. Press “Mode” enter the setting
as shown below:
4. Press “ / ” buttons to
set the time.
5. Press the “Mode” button to
confirm and exit.
ż Setting “Language”. Please, operate in a similar fashion as the “Back time” setting.
ż Setting “Power off“. The same as the “Back time”. There are two settings here:
Off time: Set your auto-off time, the unit is in seconds
Sleep time: Set your sleep mode time, the unit is in minutes, the max setting is 120
minutes.
ż Settings “Replay mode”/ “Contrast”/“Online mode”. The same as the “Back time”.
ż “Memory Info.” Shows the percentage of the disk storage space which is currently used
and free.
ż “Firmware Version”. Displays the current Firmware Version.
ż “Firmware Update”. Use this setting only if you want to perform the firmware update.
Press “Mode” button to confirm your setting, then press “Play/Pause” button to exit the
submenu.
