A SERVICE OF

logo

6
Using Your Keypad With A Battery:
1. To install a battery into your Keypad, remove the Battery Compartment Cover on the back of the Keypad, and install the enclosed
AAA battery into your Keypad following the battery orientation guide in the battery bay, and then slide the cover back onto your
Keypad until it securely locks.
2. Turn on the Power Switch on the back of your Keypad.
3. Your Keypad is now ready to be used in CALC (Calculator) mode.
4. After 5 minutes of idle time, your Keypad will turn off automatically to conserve battery power. To resume, press the <MODE/ON>
button on your Keypad.