13
MAINTENANCE and SERVICING
(Tool required - 4mm A/F Hex socket key)
10.1 To maintain the safe use of your Riva stove, you may need
to adjust the door hinges to ensure safe correct closing of
t
he door. Complete this operating as follows.
1
0.2 Open the door to give access to the fixed part of the door
hinge as shown.
10.3 To adjust the door alignment, loosen the 6 fixing screws
using a 4mm A/F hexagon head socket key. Turn screw A to
level the door. Turn screw B to raise or lower the door.
Re-tighten the fixing screws and check alignment. This may
require a trial and error approach to find the correct
position.
(Tool required - 2.5mm A/F Hex socket key)
11.1 It is possible to correct the fit of the ashpit door by
loosening the hinge fixing screws and repositioning the
hinges.
(Tool required - 2.5mm A/F Hex socket key)
12.1 It is possible to correct the operation of the ashpit door
touch latch by loosening the latches fixing screws and
repositioning the latch. This may need a trial and error
approach to find the correct position.
10. ADJUSTING DOOR HINGES
11. ADJUSTING ASHPAN COVER HINGES
12. ADJUSTING ASHPAN DOOR TOUCH
LATCH
Fixing Screws
Fixing Screws
PR7188
A
B
