A SERVICE OF

logo

G1
G2
G3
H1
H2
H3
6. Attach the assembled Suction Tube to the product
aligning the arrows as indicated (G1).
7. Turn the Suction Tube until it clicks into position (G2).
8. Secure the wire hook into postion and close the catch
(G3).
9. Place the loop on the Debris Bag over the end of
the Suction Tube (H1)
10.Attach the Debris Bag inlet to the product as
shown in Pic H2, ensuring that it clicks securely
into position. (H3)