A SERVICE OF

logo

Step 8
Attach the reflector to the top head assembly:
Attach 3pcs M8 washers on the top of 3pcs double
pointed bolts. Place assembled reflector on the top of
double pointed bolts and secure with 3pcs M8washers
and 3pcs M8 wing nuts.
Step 9
Connect gas hose to cylinder (20lb.cylinder is not supplied):
Attach regulator to cylinder.
Tighten securely.
Put gas cylinder on base. Adjust bolts in cylinder fixed parts.
Note: The regulator with gas hose is supplied.
(Regulator model: T2-LL526)
ASSEMBLY
- 11 -