A SERVICE OF

logo

Open as PDF
next previous
3-5
CrossPoint / MAV Matrix Switchers • Operation
a
Input buttons —Theinputbuttonshaveoneprimaryfunction(•)andseven
secondary functions (❏):
• Selectandidentifyaninput.
❏ (Input 1 only) With the Output 1 button, select I/O Groupmode.See
“I/Ogrouping”onpage3-24.
❏ Assign an input to the selected group in I/O Group mode and indicate its
assignment.See“I/Ogrouping”onpage3-24.
❏ Selectapreset.See“Usingpresets”onpage3-31.
❏ (CrossPoint switchers, Input 1 through 10) DisplaytheRGBdelay.See
“SettingRGBdelay(CrossPointSwitchers)”onpage3-28.
❏ (Audio models) Selectaninputtoadjusttheaudiolevelofanddisplay
itsselection.See“Viewingandadjustingtheinputaudiolevel(audio
models)”onpage3-38.
❏ (Audio models) Displaytheoutputvolumelevel.See“Viewingand
adjustingtheoutputvolume(audiomodels)”onpage3-44.
❏ (Input 1 and Input 2) Toggle background illumination of the buttons on
andoff.See“Backgroundillumination”onpage3-54.
b
Output buttons —Theoutputbuttonshaveoneprimaryfunction(•)andsix
secondary functions (❏):
• Selectandidentifyoutput(s).
❏ (Output 1)WiththeInput1button,selectI/O Groupmode.See“I/O
grouping”onpage3-24.
❏ Assign an output to the selected group in I/O Group mode and indicate its
assignment.See“I/Ogrouping”onpage3-24.
❏ (84, 88, 124, 128, 1212, and 1616 matrix sizes)Selectapreset.See“Using
presets”onpage3-31.
❏ Mutetheoutput.See“Mutingandunmutingvideoand/oraudio
outputs”onpage3-35.
❏ (Audio models) Selectanoutputtoadjustthevolumeofanddisplay
itsselection.See“Viewingandadjustingtheoutputvolume(audio
models)”onpage3-44.
❏ (Audio models) Displaytheaudioleveloftheselectedinput.See
“Viewingandadjustingtheinputaudiolevel(audiomodels)”on
page3-38.