Epson SQ-2000 Manual

A SERVICE OF

next previous

Figure 1-6. Installing the single-sheet paperguide

4

Setting Up the Single-Sheet Paper Guide

You’ll use the single-sheet paper guide to feed individual sheets

of paper into the SQ-2000.

To install this guide, hold the guide in both hands, facing the

front of the printer.

With the guide tilted away from you, lower its two notched

feet into the two slots shown above.

At the back of each slot is a round horizontal bar. Place the

notches in the guide’s feet on these two bars.

Then tilt the guide toward you and press gently until it locks

into place with a click.

To remove the guide, press on the two locking levers and tilt

the guide away from you. Then lift it free of the printer.

10