A SERVICE OF

logo

Open as PDF
next previous
+...--
Letter
Size
Paper---+
4,
;
rA4SizePaperpf
/4
Fig. 25
Setting of Cut Paper Sheet
I
Fig. 26 Printer with Cut Paper Sheet Set Completely
NOTES: 1. The Paper End Detector function may be disabled under software
control (ESC 8; refer to page 39) provided printing is left off with-
in 7.5 mm from the paper bottom edge.
2. If the paper is set on the line marked 1/4as shown in Fig. 25, then
the printing starts from a position 28.6 mm below the top edge of
the paper. If the paper is set on the line marked 1/8. then the
printing starts from a position 30.2 mm below the top edge of the
paper.
STEP 8. Push the scale back into position and put the printer lid on the
Printer. (See Fig. 26.)
-17-