Epson T70 Manual

A SERVICE OF

next previous

36

Selecting the Print Density (DIP Switch 2-3/2-4)

Function SW 2-3 SW2-4

Low power consumption mode ON ON

Print density (Standard) OFF OFF

Print density (Darker than standard) ON OFF

Print density (Dark) OFF ON

• If the print density is set to “Darker than standard” or ”Dark” level, printing speed may be

reduced.

• The print density can be set with DIP switches (2-3/2-4) or the customized value. (See

"Setting the Memory Switches" on page 38.) The initial setting of the customized value is

“Depends on the DIP switch settings.” If the customized value is changed, the value set

with the customized value is enabled.