A SERVICE OF

logo

15
Printing On Envelopes
You can load up to 15 envelopes at a time. Follow these steps to print on envelopes:
1. Load the envelopes short edge first against the right edge of the sheet feeder. The
printable side should be up, and the flap side should be down and on the left.
Slide the left edge guide against them.
2. Open the printer cover and set your printer’s thickness lever to the
^
position.
(Remember to move the thickness lever back to the
m position when you’re done.)
3. Make the following settings in your printer software:
For Media Type, select
Plain
Paper
For Orientation, select
Landscape
For Paper Size, select
Envelope #10 4 1/8 × 9 1/2
in
(Windows) or
Envelope
#10
(Macintosh)
See page 7 (Windows) or page 11 (Macintosh) for more information about making
printer software settings.
Make sure
the flap side
is on the left
Load with the printable
side up and the flap side
down