Installing the Options
11
3
Installing the Options
You can install the memory module, ROM module, Hard Disk
Drive, Interface Card, Duplex Unit, Multibin Unit, Shifter, and
Envelope Feeder to the printer. See the installation instructions
for the option you want to install.
Follow the instructions that correspond to the option you need to
install.
Memory Module
By installing a memory module, you can increase printer memory
to 256 MB. You may want to add memory if you are having
difficulty printing complex, graphics-intensive pages, using the
Duplex Unit, or if you regularly use numerous downloaded fonts.
You can purchase memory modules from various vendors. Be
sure the memory module you purchase meets the following
requirements.
DRAM type Synchronous Dynamic RAM Double In-line
Memory Module (SD RAM DIMM)
Memory size 16 MB, 32 MB, 64 MB, 128 MB, or 256 MB
Type 168-pin type, 64 bit, with SPD
Access speed 66.66 MHz or higher (15 ns or less)
Height Less than 40 mm
