STYLUS 800 Semice Manual
Operating Principles
2.4.2.4 Protect Counter
There are four protect counters to
manage the amount of ink draining to the waste ink drain tank. The
value of these counters is stored in EEPROM on the main board upon power off.
t
■
Prot@
counter A
This counter is used to manage the total amount of drained ink. If the
I
counter value is equal to or exceeds 25000 (A
2
25000), the printer
I
indicates the error on the
contiol
panel and maintenance is required.
■
protect
counter
B
This counter prevents excessive ink drainage to the waste ink drain tank
by limiting the total number of the initial charge operations. If the
operation is selected when the counter value is equal to or exceeds 10
(B
2
10), the printer only performs the false charging operation.
■
Protect counter C
This counter is used to prevent a continual initial charge operation. If the
operation is selected while the counter value is
1
(C=l),
the printer only
performs the false charging operation.
‘.
■
~k
counter R
This counter counts the amount of ink inside the cap.
Rev. B
2-23
