A SERVICE OF

logo

Open as PDF
next previous
18
GB
CABLECONNECTION
NOTE.DONOTCONNECTTHEUSBCABLETO
THECOMPUTERBEFOREINSTALLINGTHE
REALAXIOMSOFTWARE.
ConnectingthePCtotheconsole
Use the USB cable
9
to connect the console of the
RealAxiom to the PC.
Connect the wider at plug to the USB socket of
the computer and the plug on the other end into
the matching socket in the console (ill. 14).
WARNING.DONOTCONNECTTHE USBCABLE
TOTHECOMPUTERBEFOREINSTALLINGTHE
REALAXIOMSOFTWARE.
The difference of the plugs at the two ends of the
cable will avoid incorrect connections.
Connectingtheconsole
totheresistanceunit
Use the at cable
J
to connect the console of the
RealAxiom to the resistance unit. The plug at one
end of the cable ts into the matching socket in the
console (illustration 14) and the plug on the other
end into the matching socket in the resistance
unit. The difference of the plugs at the two ends of
the cable will avoid incorrect connections.
Connectingtheresistanceunit
Connect the plug coming from the cadence sensor
6
to the resistance unit. The socket is in the shell
of the resistance unit faced downwards.
Insert the plug coming from the resistance unit to
the mains power supply.
Make sure that the power unit
R
works correctly
by checking the green led on the console lights up
or ashes.
If the led is not on, the console-resistance unit and/
or the resistance unit-mains connection has not
been tted correctly.
Fasten the 3 cables to the unit using the provided
cable clamps in order to prevent any accidental
damage of the connectors. See Illustration 15.
14
RealAxiom can be used without connecting it to a PC. When the console is not connected to the PC,
RealAxiom will operate independently.
The green led on the console will ash when operating RealAxiom without connecting it to a PC. The
resistance will be at minimum level when operating RealAxiom independently.
Push the “+” key on the console to increase the resistance level and push the “-” key on the console to
decrease the resistance level.
There are 8 resistance levels in total. After 20 seconds of inactivity the resistance will automatically
return to the minimum level.
USINGREALAXIOMWITHOUTCOMPUTER
15